Outer Diameter/Height

If “Outer Diameter/Height” is disabled, it means that the width and height (in the case of a rectangular shape) define the inner figure and the thickness “wall” is added to that size.

For instance, if outer_dimentions disabled and width = 2 meters, height 1 meter and thickness 0.1 meters, then the hole has a width of 2 meters, a height of 1 meter, and the outer figure is with a width of 2.2 meters and a height of 1.2 meters.

If having the outer_dimentions enabled and the same parameters as the above example, then the hole height is 1.8 meters and width 0.8 meters, and its outer boundary contains 2 meters in height and 1 meter in width.

Next topic: Project (def.)