Tools/Add - Edit

General description

When running an analysis, a "Virtual Flow Path" will move all accumulated water from the starting point to the ending point and continue the analysis from the latter point. In this context it can be used to analyze - e.g. the effect of placing a culvert under a road or building a diversion ditch alongside a road.

Note: The concept does not consider dimensioning in any way - it will move all accumulated water from its start location to its end location without delay

New Object

1. Press the "New Object" icon - it will highlight when active.

2. Pick a start point
   Hold "Shift" to enable snap

3. When hovering the cursor it will display the elevation below
   Elevation with red color is above the starting point
   Elevation with green color is below the starting point

4. Pick your end point or next point
   Repeat 4 to create a polyline

5. Hit "Enter" to save or "Esc" to cancel

Edit Object

1. Select the object first

2. The "Edit object" button should enable - press the button

3. The selected object should be in edit mode with grip points enabled

4. Press down your mouse button and hold the grip point, drag it to a new location and release the mouse button
   Repeat 4 until all grip points are adjusted

5. Hit "Enter" to save or "Esc" to cancel

Workflow example